Impact of skeletal muscle mass on postoperative complications in oral cancer surgery.

BACKGROUND: Sarcopenia is characterized by a progressive and generalized loss of skeletal muscle mass and strength. The aim of this retrospective study was to investigate the impact of skeletal muscle mass on adverse events in free-flap reconstruction for defects after oral cancer resection. RESULTS: Of 120 patients, recipient-site adverse events occurred in 56 patients (46.7%), and recipient-site surgical site infections occurred in 45 patients (37.5%). Skeletal muscle index was significantly associated with recipient-site adverse events in univariate analysis (P < 0.05). Lower body mass index and skeletal muscle index were significantly associated with recipient-site surgical site infection in univariate analysis (P < 0.05). In the multiple logistic regression model, a lower skeletal muscle index was a significant risk factor for recipient-site adverse events and surgical site infections (adverse events odds ratio; 3.17/P = 0.04; surgical site infection odds ratio; 3.76/P = 0.02). CONCLUSIONS: The SMI at level Th12 was an independent factor for postoperative AEs, especially SSI, in OSCC patients with free-flap reconstruction.

Contrast-enhanced computed tomography of retromandibular vein position and course patterns relative to the mandible during sagittal split ramus osteotomy.

Background: Sagittal split ramus osteotomy is an established procedure used in oral and maxillofacial surgery. Major bleeding is representative intraoperative complication involves vessels such as the inferior alveolar, facial, and maxillary arteries and accompanying veins, in particular the retromandibular vein (RMV). We previously described the RMV course patterns using embalmed cadavers. However, owing to the possible influence of formalin fixation and unclear skeletal classification of the jaws, the present study aimed to use contrast-enhanced computed tomography to confirm the RMV in patients with defined jaw deformities. Methods: Twenty patients with orthognathic jaw deformities (40 sides) were included. The RMV and the lateral and posterior views of the mandible were evaluated using contrast-enhanced computed tomography. Course patterns and RMV positions were classified as previously reported. Results: Three patterns were identified in the lateral view. Type A: RMV posterior to the posterior border of the ramus (n=25; 62.5%). Type B: adjoining the posterior border of the ramus (n=12; 30.0%). Type C: anterior to the posterior border of the ramus (n=3; 7.5%). Five course patterns were identified in the posterior view. Pattern I: rectilinear course running medial to the posterior border of the ramus (n=3; 7.5%). Pattern II: diagonal course running medially from immediately posterior to posterior border of the ramus (n=11; 27.5%). Pattern III: rectilinear course running immediately posterior to the posterior border of the ramus (n=12; 30.0%). Pattern IV: diagonal course running from lateral to medial relative to the posterior border of the ramus (n=8; 20.0%). Pattern V: diagonal course running from lateral to immediately posterior relative to the posterior border of the ramus (n=6; 15.0%). In the no-course pattern group, the RMV inferior to the lingula was lateral to its position and superior to that of the lingula. In half of the cases, the left and right sides exhibited different running patterns. We observed no correlation between the skeletal patterns of jaw deformities and the course of the RMV. Conclusions: Type B/Pattern II that runs in a straight line bordering the posterior margin of the ramus requires the most attention during surgery. These findings suggest the possibility of predicting intraoperative bleeding risk.

Enhanced Precision in Genioplasty: A Novel Intraoperative Spatial Repositioning Using Computer-Aided Design and Manufacturing Technology and a Holographic Mixed Reality Application.

Genioplasty is performed for the orthognathic surgical correction of dentofacial deformities. This article reports a safe and accurate method for genioplasty combining a novel three-dimensional (3D) device with mixed reality (MR)-assisted surgery using a registration marker and a head-mounted display. Four types of devices were designed based on the virtual operation: a surgical splint with a connector; an osteotomy device; a repositioning device; and a registration marker. Microsoft HoloLens 2 and Holoeyes MD were used to project holograms created using computed tomography (CT) data onto the surgical field to improve the accuracy of the computer-aided designed and manufactured (CAD/CAM) surgical guides. After making an incision on the oral vestibule, the splint was fitted on the teeth and the osteotomy device was mounted at the junction site, placed directly on the exposed mandible bone surface. Temporary screws were fixed into the screw hole. An ultrasonic cutting instrument was used for the osteotomy. After separating the bone, a repositioning device was connected to the splint junction and bone segment, and repositioning was performed. At the time of repositioning, the registration marker was connected to the splint junction, and mandible repositioning was confirmed three-dimensionally through HoloLens 2 into the position specified in the virtual surgery. The rate of overlay error between the preoperative virtual operation and one-month postoperative CT data within 2 mm was 100%. CAD/CAM combined with MR enabled accurate genioplasty.

Structural analysis of the mylohyoid muscle as a septum dividing the floor of the oral cavity for the purposes of dental implant surgery: variety of muscle attachment positions and ranges of distribution.

OBJECTIVES: The objective was to investigate the details of the attachments of the mylohyoid muscle to the mandible anterior to the hyoid and mylohyoid lines to understand the positional relationship between the sublingual space and the mylohyoid, knowledge that is essential for dental implant surgery in the incisal region, as well as the routes of communication between the sublingual space and other spaces. METHODS: While evaluating the presence or absence of an anterior mylohyoid muscle fiber attachment to the mandible, sublingual gland herniation, spaces between muscle fascicles were also recorded as sites of penetration. The mean muscle thickness in each of these areas was also calculated. RESULTS: In all specimens, the mylohyoid originated not only from the mylohyoid line but also from the lingual surface of the center of the mandibular body (the mandibular symphysis) below the mental spines. The mylohyoid muscle fascicles were thickest in the posterior region, and further anterior to this, they tended to become thinner. Sublingual gland herniations passing through the mylohyoid were noted in the anterior and central regions, but not in the posterior region. Penetration between the muscle fascicles was most common in the central region, and no such penetration was evident in the posterior region. CONCLUSIONS: These results suggest that the mylohyoid functions only incompletely as a septum, and that routes of communication from the sublingual space to the submandibular space may be present in both the anterior and central muscle fascicles of the mylohyoid. Therefore, bleeding complications during dental implant placement in the anterior mandible can be serious issues. There is a potential for sublingual hematoma that could compromise the airway by pressing the tongue against the soft palate into the pharynx.

Characteristics of Mandibular Arch Forms in Patients with Skeletal Mandibular Prognathism.

Arch forms in orthodontics are considered to affect occlusal stability. This study's subjects were 47 patients (Class III S group) who visited the Chiba Dental Center of Tokyo Dental College and were surgical orthodontic cases, and 60 patients with Class I malocclusion were selected as the control group. A mandibular model of each subject was plotted with each tooth on a digitizer. The clinical bracket points of each tooth were plotted, and intercanine and intermolar measurements were taken. The least squares method was used to fit a quartic equation, and the arch form was drawn. The Class IIIS group was divided by Wits appraisal and facial pattern into a dolichofacial or brachyfacial pattern, and arch forms were compared. The results show that the Class IIIS group had a significantly smaller intermolar width, canine depth, and molar depth and a significantly larger canine W/D ratio. In those with a dolichofacial pattern, the anterior curve of the arch form tended to be flat and the posterior curve narrower. This is because, in skeletal mandibular prognathism, the mandibular anterior shows lingual tipping, and the molars show palatal tipping due to dental compensation, and it was inferred that this tendency was higher in high-angle cases.

Increased RUNX3 expression mediates tumor-promoting ability of human breast cancer-associated fibroblasts.

BACKGROUND: Cancer-associated fibroblasts (CAFs) are a major stromal component of human breast cancers and often promote tumor proliferation, progression and malignancy. We previously established an experimental CAF (exp-CAF) cell line equipped with a potent tumor-promoting ability. It was generated through prolonged incubation of immortalized human mammary fibroblasts with human breast cancer cells in a tumor xenograft mouse model. RESULTS: Herein, we found that the exp-CAFs highly express Runt-related transcription factor 3 (RUNX3), while counterpart fibroblasts do not. In breast cancer patients, the proportion of RUNX3-positive stromal fibroblast-like cells tends to be higher in cancerous regions than in non-cancerous regions. These findings suggest an association of RUNX3 with CAF characteristics in human breast cancers. To investigate the functional role of RUNX3 in CAFs, the exp-CAFs with or without shRNA-directed knockdown of RUNX3 were implanted with breast cancer cells subcutaneously in immunodeficient mice. Comparison of the resulting xenograft tumors revealed that tumor growth was significantly attenuated when RUNX3 expression was suppressed in the fibroblasts. Consistently, Ki-67 and CD31 immunohistochemical staining of the tumor sections indicated reduction of cancer cell proliferation and microvessel formation in the tumors formed with the RUNX3-suppressed exp-CAFs. CONCLUSION: These results suggest that increased RUNX3 expression could contribute to the tumor-promoting ability of CAFs through mediating cancer cell growth and neoangiogenesis in human breast tumors.

Mixed reality for extraction of maxillary mesiodens.

BACKGROUND: Mesiodentes are the most common supernumerary teeth. The cause is not fully understood, although proliferations of genetic factors and the dental lamina have been implicated. Mesiodentes can cause delayed or ectopic eruption of permanent incisors, which can further alter occlusion and appearance. Careful attention should be paid to the position and direction of the mesiodentes because of possible damage to adjacent roots in the permanent dentition period, errant extraction in the deciduous and mixed dentition periods, and damage to the permanent tooth embryo. To avoid these complications, we applied mixed reality (MR) technology using the HoloLens® (Microsoft, California). In this study, we report on three cases of mesiodentes extraction under general anesthesia using MR technology. RESULTS: The patients ranged in age from 6 to 11 years, all three were boys, and the direction of eruption was inverted in all cases. The extraction approach was palatal in two cases and labial in one case. The average operative time was 32 min, and bleeding was minimal in all cases. No intraoperative or postoperative complications occurred. An image was shared preoperatively with all the surgeons using an actual situation model. Three surgeons used Microsoft HoloLens® during surgery, shared MR, and operated while superimposing the application image in the surgical field. CONCLUSIONS: The procedure was performed safely; further development of MR surgery support systems in the future is suggested.

Three-Dimensional Analysis of the Cranial Base Structure in Patients with Facial Asymmetry.

Facial asymmetry is often seen in patients with skeletal mandibular prognathism and is associated with deformities in the maxillofacial and head regions. The maxillofacial deviation is three-dimensional and affects not only the lateral deviation of the mandible and midface, but also the cranium. This study conducted a three-dimensional morphological evaluation of the cranial base morphology of patients with skeletal mandibular prognathism (ANB < 0°, Wits < 0 mm) with the aim of examining the relationship between deformities of the head region and facial asymmetry. Data obtained from computed tomography conducted during the initial examination of patients with and without skeletal mandibular prognathism with facial asymmetry were used. Differences in the position of structures present in the cranial base were measured, and the association between cranial deformities and mandibular deviation was assessed. The middle cranial base area and the lateral deviation of the mandibular fossa were significantly larger in patients with facial asymmetry compared to those without facial asymmetry. In addition, a correlation between the amount of mandibular deviation and the area of the anterior cranial base was identified in patients with significant cranial deformity (p = 0.012). Given the identified association between the structure of the head region and facial asymmetry, further studies are needed to determine the factors implicated in the growth process.

Clinical investigation of patients with jaw deformity with comorbidities.

BACKGROUND: With improvements in the safety and stability of surgeries, the number of orthognathic surgeries is increasing. Most patients who undergo orthognathic surgeries are younger, and the number of orthognathic surgeries for patients with comorbidities is also increasing. We report a survey and clinical investigation of patients with comorbidities who underwent orthognathic surgeries at our department to improve the safety of orthognathic surgery. RESULTS: The participants included 296 men and 712 women, with a mean age of 28 years (13-19 years, n=144; 20-29 years, n=483; 30-39 years, n=236; 40-49 years, n=102; 50-59 years, n=39; ≥60 years, n=4). In total, 347 patients underwent one-stage Le Fort type I osteotomy and sagittal split ramus osteotomy (SSRO), 243 underwent SSRO, 287 underwent plate removal, 126 underwent genioplasty and plate removal, and five underwent other surgeries. In total, 529 patients had comorbidities (52%), including allergic diseases (n=220, 33%), respiratory diseases (n=107, 16%), neurologic and psychiatric diseases (n=69, 10%), gynecologic diseases (n=28, 4%), hematologic diseases (n=27, 4%), cardiovascular diseases (n=24, 4%), digestive diseases (n=22, 3%), metabolic and endocrine diseases (n=18, 3%), spinal diseases (n=11, 2%), ophthalmologic diseases (n=11, 2%), renal and urological diseases (n=9, 1%), and other diseases (n=117, 18%). Among the patients with comorbidities, 11 with hemorrhagic diatheses (hemophilia and von Willebrand disease), arrhythmia (atrioventricular block), psychiatric disease (adjustment disorder), and metabolic disease (diabetes) required cautious perioperative management. The patient with hemophilia was managed with regular low-dose recombinant factor VIII replacement therapy, and the patient with type I diabetes mellitus was administered continuous insulin infusion and sliding-scale insulin therapy; both patients had an uneventful course. CONCLUSIONS: The study findings suggest that with the increase in orthognathic surgeries, oral and maxillofacial surgeons should adequately manage cases requiring cautious perioperative control and highlight the importance of preoperative screening. Despite the well-established safety and postoperative stability of orthognathic surgeries, oral surgeons should adopt appropriate additional preventive measures for patients with comorbidities.

A clinico-statistical study of factors associated with intraoperative bleeding in orthognathic surgery.

BACKGROUND: Excessive bleeding is a major intraoperative risk associated with orthognathic surgery. This study aimed to investigate the factors involved in massive bleeding during orthognathic surgeries so that safe surgeries can be performed. Patients (n=213) diagnosed with jaw deformities and treated with bimaxillary orthognathic surgery (Le Fort I osteotomy and bilateral sagittal split ramus osteotomy) in the Department of Oral and Maxillofacial Surgery at the Suidobashi Hospital, Tokyo Dental College between January 2014 and December 2016 were included. Using the patients' medical and operative records, the number of cases according to sex, age at the time of surgery, body mass index (BMI), circulating blood volume, diagnosis of maxillary deformity, direction of maxillary movement, operative duration, incidence of bad split, injury of nasal mucosa, and blood type were analyzed. RESULTS: The results revealed that BMI, circulating blood volume, nasal mucosal injury, and operative time were associated with the risk of intraoperative massive bleeding in orthognathic surgeries. Chi-square tests and binomial logistic regression analyses showed significant differences in BMI, circulating blood volume, direction of maxillary movement, operative duration, and injury to the nasal mucosa. Operative duration emerged as the most important risk factor. Furthermore, a >4-mm upward migration of the posterior nasal spine predicted the risk of massive bleeding in orthognathic surgery. CONCLUSIONS: The upward movement of the maxilla should be recognized during the preoperative planning stage as a risk factor for intraoperative bleeding, and avoiding damage to the nasal mucosa should be considered a requirement for surgeons to prevent massive bleeding during surgery.

Osteotomy training for dental students using three-dimensional simulation software and maxillofacial three-dimensional-printed models.

PURPOSE/OBJECTIVES: Simulated educational models of teeth, bones, and gums have been used for a long time in procedural skills training in dentistry.  The advent of three-dimensional (3D) printing technologies and additive manufacturing has facilitated the production of more advanced 3D printed models that can be utilized for surgical and dental training together with other technologies (e.g., 3D scanners and image analysis software). METHODS: We conducted training on osteotomy in the maxilla and mandible using maxillofacial simulation software (MSS) and a 3D-printed model for 5th-year undergraduate dental students (13 students in 2017 and 11 students in 2018 with more than half of their results). We compared the group (13 students) who performed osteotomy after participating in the simulation lecture with those (11 students) who performed osteotomy after performing self-simulation (they were instructed to bring their personal computers and install the MSS) using tests and questionnaires (pre- and post-curriculum). RESULTS: The average test score was significantly higher in the group who performed osteotomy using the 3D-printed model after performing self-simulation; participants in this group had acquired a better understanding of the surgical procedure. Comparison using questionnaires showed a significant difference in the students' understanding of instruments and surgical techniques between both groups. CONCLUSION: The MSS and 3D printed models are widely used clinically. Incorporating these in the curriculum will help accelerate student development. In addition, prompt education on the purpose and usefulness of these tools will not only facilitate simulation software and 3D-printed model-based treatment plan in the clinic but also promote further research.

Aging-related metabolic changes in the extensor digitorum longus muscle of senescence-accelerated mouse-prone 8.

AIM: Sarcopenia - aging-related loss of muscle mass and muscle strength - is a key feature of the frailty model. In the present study, we aimed to elucidate the molecular biological changes associated with aging in the extensor digitorum longus muscle of senescence-accelerated mouse prone 8 mouse model by capillary electrophoresis-mass spectrometry. METHODS: Three groups of senescence-accelerated mouse prone 8 mice were used, namely, 12-week-old (young; n = 5), 40-week-old (elderly; n = 5) and 55-week-old mice (late elderly; n = 5). The extensor digitorum longus muscle was collected. After preliminary analyses, metabolome analysis was carried out by capillary electrophoresis-mass spectrometry. Additionally, we examined whether the activity of enzymes in the metabolic pathway fluctuated with aging, by real-time polymerase chain reaction. RESULTS: Among the 116 water-soluble metabolites associated with the central energy metabolism pathway, changes were observed in 19 metabolites between 12- and 40 -weeks-old, in 40 metabolites between 40- and 55-weeks-old, and in 57 metabolites between 12- and 55-weeks-old. The fluctuated metabolites that were common among the groups were Val, putrescine and His. The levels of putrescine, associated with cell proliferation, protein synthesis and nucleic acid synthesis, and ß-Ala and His, a component of carnosine that is characterized by its anti-oxidant and anti-fatigue effects, decreased with age. CONCLUSIONS: We confirmed that there were two aging-related metabolic changes in the extensor digitorum longus muscle of senescence-accelerated mouse prone 8 mice. Based on the changes in metabolites, cell senescence and fatigue in the extensor digitorum longus muscle might increase in old mice compared with those in young mice, showing molecular biological changes with aging. Geriatr Gerontol Int 2022; 22: 160-167.

Evaluation of the Properties of the DNA Methyltransferase from Aeropyrum pernix K1.

Little is known regarding the DNA methyltransferases (MTases) in hyperthermophilic archaea. In this study, we focus on an MTase from Aeropyrum pernix K1, a hyperthermophilic archaeon that is found in hydrothermal vents and whose optimum growth temperature is 90°C to 95°C. From genomic sequence analysis, A. pernix K1 has been predicted to have a restriction-modification system (R-M system). The restriction endonuclease from A. pernix K1 (known as ApeKI from New England BioLabs Inc. [catalog code R06435]) has been described previously, but the properties of the MTase from A. pernix K1 (M.ApeKI) have not yet been clarified. Thus, we demonstrated the properties of M.ApeKI. In this study, M.ApeKI was expressed in Escherichia coli strain JM109 and affinity purified using its His tag. The recognition sequence of M.ApeKI was determined by methylation activity and bisulfite sequencing (BS-seq). High-performance liquid chromatography (HPLC) was used to detect the position of the methyl group in methylated cytosine. As a result, it was clarified that M.ApeKI adds the methyl group at the C-5 position of the second cytosine in 5'-GCWGC-3'. Moreover, we also determined that the MTase optimum temperature was over 70°C and that it is strongly tolerant to high temperatures. M.ApeKI is the first highly thermostable DNA (cytosine-5)-methyltransferase to be evaluated by experimental evidence. IMPORTANCE In general, thermophilic bacteria with optimum growth temperatures over or equal to 60°C have been predicted to include only N4-methylcytosine or N6-methyladenine as methylated bases in their DNA, because 5-methylcytosine is susceptible to deamination by heat. However, from this study, A. pernix K1, with an optimum growth temperature at 95°C, was demonstrated to produce a DNA (cytosine-5)-methyltransferase. Thus, A. pernix K1 presumably has 5-methylcytosine in its DNA and may produce an original repair system for the expected C-to-T mutations. M.ApeKI was demonstrated to be tolerant to high temperatures; thus, we expect that M.ApeKI may be valuable for the development of a novel analysis system or epigenetic editing tool.

Mixed reality and three dimensional printed models for resection of maxillary tumor: a case report.

In the field of oral and maxillofacial surgery, many institutions have recently begun using three-dimensional printers to create three-dimensional models and mixed reality in a variety of diseases. Here, we report the actual situation model which we made using three-dimensional printer from virtual operation data and the resection that was performed while grasping a maxillary benign tumor and neighboring three-dimensional structure by designing an application for Microsoft® HoloLens, and using Mixed Reality surgery support during the procedure.

Retromandibular vein position and course patterns in relation to mandible: anatomical morphologies requiring particular vigilance during sagittal split ramus osteotomy.

Major bleeding associated with sagittal split ramus osteotomy (SSRO) involves vessels such as the inferior alveolar, facial, and maxillary arteries and veins, and the retromandibular vein (RMV). The present study aimed to clarify and classify the three-dimensional variations in RMV position and course direction in relation to the mandible. Specimens comprised a total of 15 scientific cadavers, and the relationship between RMV and the mandible lateral and posterior views was observed. We identified 3 patterns on the lateral view, the mean distance between the RMV and the posterior border of the ramus was 3.9 mm at the height of the lingula. A total of five course patterns were identified on the posterior view. In no course pattern, the RMV inferior to the lingula was lateral to its position superior to the lingual. The present findings suggest that it may be possible to predict correlations with intraoperative bleeding risk. Further study is planned using contrast computed tomography in patients with jaw deformity for skeletal classification.

A safe, stable, and convenient three-dimensional device for high Le Fort I osteotomy.

BACKGROUND: Le Fort I osteotomy is a highly effective treatment for skeletal jaw deformities and is commonly performed. High Le Fort I osteotomy is a modified surgical procedure performed for improving the depression of the cheeks by setting the osteotomy higher than the conventional Le Fort I osteotomy. Developments in three-dimensional (3D) technology have popularized the use of 3D printers in various institutions, especially in orthognathic surgeries. In this study, we report a safe and inexpensive method of performing a high Le Fort I osteotomy using a novel 3D device and piezosurgery, which prevent tooth root injury without disturbing the operation field for patients with a short midface and long tooth roots. RESULTS: A 17-year-old woman presented with facial asymmetry, mandibular protrusion, a short midface, and long tooth roots. We planned high Le Fort I osteotomy and bilateral sagittal split ramus osteotomy. Prevention of damage to the roots of the teeth and the infraorbital nerve and accurate determination of the posterior osteotomy line were crucial for clinical success. Le Fort I osteotomy using 3D devices has been reported previously but were particularly large in size for this case. Additionally, setting the fixing screw of the device was difficult, because of the risk of damage to the roots of the teeth. Therefore, a different surgical technique, other than the conventional Le Fort I osteotomy and 3D device, was required. The left and right parts of the 3D device were fabricated separately, to prevent any interference in the surgical field. Further, the 3D device was designed to accurately cover the bone surface from the piriform aperture to the infra-zygomatic crest with two fixation points (the anterior nasal spine and the piriform aperture), which ensured stabilization of the 3D device. The device is thin and does not interfere with the surgical field. Safe and accurate surgical performance is possible using this device and piezosurgery. The roots of the teeth and the infraorbital nerve were unharmed during the surgery. CONCLUSIONS: This device is considerably smaller than conventional devices and is a simple, low-cost, and efficient method for performing accurate high Le Fort I osteotomy.

Relationship between the immunohistological examination and fluorescence visualization of oral squamous cell carcinoma.

Disorders of the oral mucosa are considered easy to diagnose since they can be visualized and examined directly. A change in the color of the oral mucosa reflects histopathological changes and is an important diagnostic parameter. However, the subjective perception of color varies. To determine the extent of resection for oral mucosa conditions, it is necessary to digitize the color and perform objective assessments. In recent years, fluorescence visualization devices and analysis software that measure tissue luminance G have been employed for the identification of oral mucosa diseases. Fluorescence visualization is presumably based on the decrease in epithelial flavin adenine dinucleotide content and luminance G values due to the destruction of collagen cross-links [fluorescence visualization loss (FVL)]. However, cases with differences between luminance values and histopathological presentation exist. Therefore, additional factors may affect fluorescence visualization. The present study used a portable, non-contact oral mucosa fluorescence visualization device for luminance measurements in seven patients with oral squamous cell carcinoma. Furthermore, Picro-Sirius Red and immunohistochemical staining were performed for CK13, CK17, Ki67, p53 and E-cadherin in the FVL(+) (lesion) and FVL(-) (resection stump) areas to elucidate the principle of fluorescence visualization. Fluorescence was significantly lower in the FVL(+) than in the FVL(-) areas, and the mean luminance G value was 56. The Picro-Sirius Red stain revealed collagen destruction in the FVL(+) areas but no collagen disruption in the FVL(-) areas. CK13 was negative in the FVL(+) and positive in the FVL(-) areas, whereas the opposite pattern was observed for CK17. In the FVL(+) area, p53 staining was positive. E-cadherin expression was enhanced in the FVL(-) areas and reduced in the FVL(+) areas. Furthermore, the luminance G value tended to be lower in cases with weaker E-cadherin staining. The aforementioned results suggest that decreased E-cadherin expression may be a factor that regulates fluorescence visualization.

Maxillary reconstruction using tunneling flap technique with 3D custom-made titanium mesh plate and particulate cancellous bone and marrow graft: a case report.

BACKGROUND: Reconstructive surgery is often required for tumors of the oral and maxillofacial region, irrespective of whether they are benign or malignant, the area involved, and the tumor size. Recently, three-dimensional (3D) models are increasingly used in reconstructive surgery. However, these models have rarely been adapted for the fabrication of custom-made reconstruction materials. In this report, we present a case of maxillary reconstruction using a laboratory-engineered, custom-made mesh plate from a 3D model. CASE PRESENTATION: The patient was a 56-year-old female, who had undergone maxillary resection in 2011 for intraoral squamous cell carcinoma that presented as a swelling of the anterior maxillary gingiva. Five years later, there was no recurrence of the malignant tumor and a maxillary reconstruction was planned. Computed tomography (CT) revealed a large bony defect in the dental-alveolar area of the anterior maxilla. Using the CT data, a 3D model of the maxilla was prepared, and the site of reconstruction determined. A custom-made mesh plate was fabricated using the 3D model (Okada Medical Supply, Tokyo, Japan). We performed the reconstruction using the custom-made titanium mesh plate and the particulate cancellous bone and marrow graft from her iliac bone. We employed the tunneling flap technique without alveolar crest incision, to prevent surgical wound dehiscence, mesh exposure, and alveolar bone loss. Ten months later, three dental implants were inserted in the graft. Before the final crown setting, we performed a gingivoplasty with palate mucosal graft. The patient has expressed total satisfaction with both the functional and esthetic outcomes of the procedure. CONCLUSION: We have successfully performed a maxillary and dental reconstruction using a custom-made, pre-bent titanium mesh plate.